Skip to main content
Intronis Partner Toolkit

Restoring a System State Backup

When restoring a System State backup, the process is two-fold.  The first part is restoring the system state files backed up with Intronis and the second part is importing the system state files into Windows Server Backup to complete the restore.  This article will outline the process for the first part as well as tell you where to look for help with the second.

 

Directions


  1. Log on to the management portal and navigate to the computer account you want to restore.
     

  2. Go to the Restore tab and hit the button labeled Start a Restore.
     

  3. On the first page in the Restore wizard, select System State as the data type and hit Next.


  4. On the next page, select the date of the system state you want to restore.  After putting a check mark in the box next to your desired revision, hit Next to continue.


  5. At this point, you will specify where you want to restore the system state files to.  Enter a path in the Destination field manually or choose one via the Browse... button and click Next to proceed.
     

  6. On the final page, you will be given a summary of the restore job.  If every thing looks OK, click Restore to start the restore.

 

 

 

 

 

 

 

 

Importing the System State Backup


After you have restored the system state files, use this article from Microsoft to import the system state files into Windows Server Backup.

Note:  Windows requires identical hardware and system configuration in order for Windows Server Backup to recognize a system state. A system state file created by one computer will not be recognized as existing by Windows Server backup. 

Microsoft states the following: "Microsoft does not support restoring a system state backup from one computer to a second computer of a different make, model, or hardware configuration. Microsoft will only provide commercially reasonable efforts to support this process. Even if the source and destination computers appear to be identical makes and models, there may be driver, hardware, or firmware differences between the source and destination computers."

  • Was this article helpful?